CurrentBody Skin LED Mask Series 2
The CurrentBody Skin LED Mask Series 2 uses 236 LEDs at 633 nm, 830 nm, 1072 nm, in sessions of 10 min.
Brand-sponsored device studies. 633/830 nm are well studied; 1072 nm has thinner independent literature.
LED face masks · head to head
Two of the nine LED face masks in our comparison table, side by side. Every figure below is one the manufacturer publishes itself; where a brand stays silent the cell says so.
The short answer
The CurrentBody Skin LED Mask Series 2 emits at 633 nm, 830 nm, 1072 nm. The Silk’n LED Face Mask 100 emits at 463 nm, 592 nm, 633 nm. The CurrentBody Skin LED Mask Series 2 covers both red and near-infrared, the two ranges with the strongest published evidence for skin; the Silk’n LED Face Mask 100 does not.
Only the CurrentBody Skin LED Mask Series 2 publishes an irradiance figure (~30 mW/cm²). The Silk’n LED Face Mask 100 does not, so the dose the two masks deliver cannot be compared.
Side by side
| Specification | CurrentBody Skin LED Mask Series 2 | Silk’n LED Face Mask 100 |
|---|---|---|
| Wavelengths | 633 nm830 nm1072 nm | 463 nm592 nm633 nm |
| LEDs | 236 | 100 |
| Published irradiance | ~30 mW/cm² | Not published |
| Dose per session | ~18 J/cm² | — |
| Session | 10 min | ~10 min |
| Modes | Single automatic programme | 4 colours |
| Regulatory | FDA cleared · CE | CE marked cosmetic device — no FDA clearance for this model |
| Fit | Flexible silicone | Semi-rigid |
| Power | Rechargeable clip-on controller | Rechargeable, ~130 min runtime |
| Price (EU) | €449.99 €1.91 per LED | €160.00 €1.60 per LED |
“Published irradiance” means the brand prints an output figure on its own product page. “FDA cleared” is not “FDA approved” — see the questions below.
Where they differ
Evidence notes
The CurrentBody Skin LED Mask Series 2 uses 236 LEDs at 633 nm, 830 nm, 1072 nm, in sessions of 10 min.
Brand-sponsored device studies. 633/830 nm are well studied; 1072 nm has thinner independent literature.
The Silk’n LED Face Mask 100 uses 100 LEDs at 463 nm, 592 nm, 633 nm, in sessions of ~10 min.
A cosmetic device rather than a certified medical one. Its 463 nm and 592 nm are less evidence-backed than the core red and near-infrared.
Questions
The CurrentBody Skin LED Mask Series 2 emits at 633 nm, 830 nm, 1072 nm. The Silk’n LED Face Mask 100 emits at 463 nm, 592 nm, 633 nm. The CurrentBody Skin LED Mask Series 2 covers both red and near-infrared, the two ranges with the strongest published evidence for skin; the Silk’n LED Face Mask 100 does not.
Only the CurrentBody Skin LED Mask Series 2 publishes an irradiance figure (~30 mW/cm²). The Silk’n LED Face Mask 100 does not, so the dose the two masks deliver cannot be compared.
The CurrentBody Skin LED Mask Series 2 carries more diodes: 236 against 100. Diode count sets how evenly light reaches the face — a coverage figure, not an efficacy figure.
CurrentBody Skin LED Mask Series 2: FDA cleared · CE. Silk’n LED Face Mask 100: CE marked cosmetic device — no FDA clearance for this model. Clearance under section 510(k) means the manufacturer showed substantial equivalence to a device already on the market and met safety standards — it is not FDA approval, and it is not evidence of efficacy.
Keep comparing